What size chain do I need for my bike?

Narrower 3/32” chains are available for weight-shaving racers, as are more heavy-duty 3/16” chains, but for most riders the standard is fine. Chains are sold in standard lengths of 96, 98 or 112 links so you will need to use a chain tool to get it the right size for your drivetrain before installation.

How do I know my bike chain size?

Begin by counting the number of teeth on the largest front sprocket and largest rear. These numbers are often printed right on the sprockets and cogs. Next, measure the distance between the middle of the crank bolt to the rear axle. This is also the chain stay length.

What size chain does a bike use?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

IT IS INTERESTING:  Your question: What are the components of a bike?

How do I know my chain size?

How to Tell What Size Chain You Have

  1. The distance from the center of one pin to the center of the next pin, also known as the “pitch” of the roller chain.
  2. The diameter and width of the roller.
  3. Plate thickness, determined by measuring the plates from one flat side to another.
  4. Plate height is the dimension from the bottom to the top of the plate.

The 11 speed Shimano comes with 116 links.

How do I know if my bike chain is too short?

You should also see two slight bends at each jockey wheel of the rear derailleur. If the chain is too short, this shift is difficult to make and the derailleur cage is stretched out and almost parallel to the chainstay. If the chain is really short, then you might not even be able to shift into the largest cog.

How often should I change my bike chain?

To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point.

What is a 3 32 chain?

3/32″ (0.094″, 2.30 mm) chain is used on derailer equipped bicycles that have more than 3 cogs at the rear. Even somewhat narrower chain, typically . 090″ or 2.29 mm between the inner plates, is used for derailer-equipped bicycles with 9 or more sprockets at the rear.

What size chain do I need for a 7 speed bike?

If you are using a bike with a derailleur the number of cogs on the rear hub will determine the chain size you will need. They are always 3/32″ chains. You can get a 5/6/7-speed, 8-speed, 9-speed, or 10-speed chains.

IT IS INTERESTING:  How far should I cycle?

What size is 08B chain?

08B Roller Chain dimensions – ISO R606

Chain No. DIN P x W Width W (mm)
08B-1 1/2 X 5/16″ 7.75
08B-2 1/2 X 5/16″ 7.75
08B-3 1/2 X 5/16″ 7.75

What size is 40 chain?

Chain standards

Size Pitch Maximum Roller Diameter
25 0.250 in (6.35 mm) 0.130 in (3.30 mm)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm)

Will 40 chain fit 420 sprocket?

The pitch will be the same but a 420 motorcycle chain is narrower than an ANSI 40 or 41 chain, so no it won’t fit.

When should I replace my 11 speed chain?

If you are using an eleven or twelve speed chain, replace your chain once it has reached 0.5 percent wear. For two-sprocket or single speed bikes, replace your chain as it reaches the 1 percent wear mark.

Are all 11 speed chains compatible?

11 speed chains of all the manufacturers are mutually compatible. Since 10 and 11 speed chains are almost the same width, as well as cassette teeth, 10 speed chain can be used in stead of 11 speed one, without it jamming between the sprockets.

What happens if bike chain is too long?

A chain that’s too long (loose) may cause dropped chains and/or inconsistent shifting — front and back shifting. A chain that’s too short (tight) can cause even bigger problems. … BUT, things can go really bad … if it does shift and rips the derailleur off, damages the chain or bends gear teeth.

IT IS INTERESTING:  Do I need a helmet to bike?
Cycling