Except when you complain. Then it takes 1-2 weeks. During the busy season, which is now, a bike mechanic can do 5-7 tune-ups a day, less if he has to deal with customers. BTW, if he trues your wheel, and your derailleur shifts into the spokes, you are ok with that, right?
Is it hard to true a bike wheel?
Truing a wheel involves tightening and loosening the spoke nipples to realign warped sections of the rim, and it’s something you can do at home. “It’s meticulous and time-consuming, but the actual principle of it is pretty simple,” says Justin McCloud, professional bike mechanic and owner of Blackbird Bike Co.
How true should a bike wheel be?
3 Answers. If your wheel is trued (lateral movement) to within 0.5mm it is considered good. Same 0.5mm tolerance for the roundness of the wheel. … And finally the wheel will go out of true with use especially during the first few rides, so check it after a couple of months.
How long does it take to build a bike wheel?
The quickest was around 45 minutes, but as a rule you should spend a minimum of an hour, for the sake of quality. Good high quality stiff rims speed things up, especially if the rim is already straight, as does a spoke nipple driver. Lacing used to take me about 10 minutes.
How much does truing a bike wheel cost?
If the wheel is fixable–it generally looks good but has a wobble–you can expect your local bike shop to charge $20 – $30 to true it using professional equipment like a truing stand for the perfect line and roundness.
Is it safe to ride a bike with a wobbly wheel?
It could be wobbly for a number of reasons, if you’re not confident to take the entire back wheel apart and have a look, I’d take it to your local bike shop. It might just need to be tightened, or your frame/wheel could be bent, or more. … For me personally, I wouldn’t ride a bike with a wobbly wheel.
Should all spokes be same tension?
Learn how to properly tension the spokes in a wheel. … Spokes that are too loose will continue to loosen and require constant wheel truing. Spokes that are too tight will cause damage to the rim, spoke nipples and hub flanges. All of the spokes in the wheel should have approximately the same average tension.
Why is my bicycle wheel wobbling?
If it’s wobbling side to side, there are two problems that are possible; Your cup-and-cone bearings could be loose or your wheel could be out of true (slightly buckled.) Take your wheel off and hold the axle. Wobble it up and down a few times. … Worst case scenario, you could be looking at missing spokes or a bent axle.
Is it cheaper to build your own bike wheels?
If you have to pay for labor, pre-built wheels will most likely be cheaper in the long run. If you price shop for the individual components and build them yourself that’s probably the cheaper way to go.
How hard is it to build a wheel?
Building wheels isn’t tricky, just remembering all the steps and the pattern is a pain the first few times. I found it to be pretty easy. You don’t need a truing stand or a dishing tool if you build it on your bike. Just do your homework and be careful.
How long does it take to repair a wheel?
Cosmetic repairs will take about 3 days….. If we are just straightening a wheel it can take just one day.
Can you fix a bent rim on a bike?
Rims can get bent out of shape from hitting a big pothole, by getting twisted when you try to wedge your bike in or out of a rack and when a spoke breaks. … Fixing a moderately bent rim yourself is easily accomplished with a spoke wrench, which comes in several sizes.
How tight should bike spokes be?
The spokes should feel tight and firm. They should have just a little give when you squeeze them fairly hard. … Squeeze a few spokes on other bikes to get an idea of how they should feel. It is rare for spokes to be too tight, but it is very common for them to be too loose.