Frequent question: What is the best rear shock for a mountain bike?

How do I know what size rear shock I need?

The eye-to-eye measurement is the length of the shock from the centre of one mounting eye to the centre of the other. Also remember to measure the size of the connecting hardware, including the width of the end bushings and the size of the bolts used to attach shock to frame (normally 5mm or 7mm).

What are the best mountain bike shocks?

Six of the best mountain bike air shocks

  • Six of the best mountain bike air shocks Steve Behr.
  • Fox Racing Shox Float DPS EVOL Factory Steve Behr.
  • RockShox Monarch Plus DebonAir RC3 Steve Behr.
  • BOS Kirk Steve Behr.
  • DT Swiss X313 Steve Behr.
  • Cane Creek DBInline Steve Behr.
  • X-Fusion O2 RCX Steve Behr.

14 сент. 2015 г.

Can I put a longer rear shock on my mountain bike?

Can you put a longer rear shock on your mountain bike? Take some measurements to make sure a shock matches your bike height, weight, and overall movement. If you put too long of a rear shock, it can negatively affect your comfort. Do it right, though, and you’ll be able to absorb a lot of the shock well.

IT IS INTERESTING:  Do MTB wheels make a difference?

Is ohlins better than Fox?

The main benefit of the Fox X2 vs the Ohlins TTX is that the former has a wider range of settings, due to being a ported design – and is thus easier to mass produce and sell after market. Cant coment on the Fox but we are running three of the Ohlins on our Enduros.

How do I choose a rear shock spring?

Rear shock springs in-depth

If you wish to experiment with your spring rate – e.g. try a heavier or lighter spring for more or less active suspension – simply choose one with the same length but a spring rate above or below your existing spring and experiment until you find the sweet spot for your weight and riding.

How do you measure the stroke length of a rear shock?

Stroke length refers to the total distance the shock can compress. You can measure the stroke length by subtracting the eye to eye length when the shock is fully compressed, from the eye to eye length when the shock is fully extended – you should get relatively close to the shock’s stroke length.

How do you measure rear shock mounting hardware?

One way to measure the width of the shock hardware is to measure the distance between the shock mounting tabs on the frame of the bike. To get the same measurement, you may also measure the width across the shock eyelet. Lastly, to find the shock bolt diameter, measure the inner diameter of the hardware eyelet.

Why are mountain bike forks so expensive?

Mountain bike forks are expensive because there is more travel, the travel is adjustable, and the stanchions have a larger diameter. The dampening is better, increased control, and higher quality material is used. … These high end forks are used by mountain bikers for specific purposes.

IT IS INTERESTING:  Should I get a cyclocross or road bike?

Are suntour shocks any good?

The higher-level Suntour forks and shocks are very good. Don’t judge them by the bottom budget forks. I’d actually put them up there with Fox and RS on quality.

Do I need a piggyback shock?

Piggyback shocks are really only advantageous for heavy, aggressive riders. Sure it also has to do with trail difficulty, but in my experience weight is a bigger factor. If you are 150lbs it doesn’t really matter what kind of trails you ride, an inline is going to be just fine.

How do you remove the rear shock on a mountain bike?

  1. Step 1: Remove your rear wheel and clean any dirt from the bolt heads.
  2. Step 2: Think about what will happen when the frame loses the support of the shock. …
  3. Step 3: Use a quality Allen key/s to undo the shock mount bolts, make sure to fully insert the tool to prevent bolt damage.